J40  - ×   TJ/ZK   ×    ×  -  ×   (covering)      ?      ?     ?      ?    ?     ?           ?:J40 — Series Prefix       ?:× — Number of Contacts:11?13?15?25?31?39?51       ?:TJ/ZK —Type of Connectors and Contacts:TJ-- Pin in the plug   ZK-- Socket in the receptacle       ?:× — Mounting Mode:No designator for crimp?S -- Solder?N – in-line for PCB?W – Right Angle for PCB       ?:× — Type of Hardware:Q – Bayonet fast locking set; used with type“K” bayonet fast locking bolt?Q1 – Short bayonet fast locking set; used with type“K” bayonet fast locking bolt?K -- Bayonet fast locking bolt,used with type “Q” bayonet fast locking set or type “Q1” bayonet fast locking set?P -- Installation bolt; used with type L locking bolt?P2-installation bolt, suitable for installing from back board, used with type“L2” locking bolt; L -- locking bolt; used with Type P installing bolt; L2-locking bolt, used with type “P2”installation bolt.       ?:× —special design : no designator for basic mode?A – on the surface of the plug and receptacle has no flange in the width direction,needing suitable hardware ?B –the plug with two installation holes for f2.2 unthreaded holes on the flange, and with a installation screw; the receptacle with installation screw ,sealed washer, wide flange with four installation holes for f2.2 unthreaded holes?C – the plug with right angle cable clamp and installation screw; the receptacle with rubber washer and installation screw?D –the plug, receptacle with right angle cable clamp, needing suitable hardware , E/EI-the flange is widen , and with error proof function; K – the plug ,receptacle with two installation holes for f2.2 unthreaded holes on the flange, needing suitable hardware; TJ1/ZK1-the section area of cable for crimp contacting is 0.10mm2~0.15mm2, and the shell is the same with TJ/ZK. Note :the covering is not included in the ordering information, please mark the cable type in the bracket. For example: the section area, the length and the color of cable. If the relative of connecting cable is complex, please give the connecting cable table.       Note:1?There are only two types of connectors and contacts: “TJ” and “ZK” ;                 2?Among the retaining members type “Q”?type “Q1” and type “K” are suitable for 11 cores and 13 cores connectors only ;                 3?The variation type “-D” is suitable for 11 cores and 13 cores connectors only. For example  J40  - 25   ZKS   P      (covering)    Means the number of contact is 25, socket in receptacle, the termination style is solder wire, with type P installation bolt. (covering: the section area, length and color of cable, etc)

Plug (receptacle) accessories

Retaining member

Instruction

The plug (receptacle) must be ordered with retaining member at the same time, so that it is a whole connector.